Epoxy resin 3D effect La Pajarita 750ml

• 3D effect Epoxy Resin is a colorless varnish with two components (Component A and Component B) whose mixture, in the appropriate proportion, produces crystalline finishes of high hardness and shine.
• Thick, level and bubble-free coats can be achieved. The resin is self-leveling.
• It can be applied to a multitude of surfaces: wood, paper, cardboard, metal, plaster, ceramic, stone and any painted surface, providing durable and resistant surfaces, capable of withstanding humidity, cleaning stains... etc.
• Does not yellow and offers a finish that is not broken by impacts.
• Instructions for use:
• - It is very important that both components are perfectly mixed, following the proportions indicated by the manufacturer on the package, otherwise the product will not harden correctly and may be sticky or have imperfections.
• - It is recommended that the containers are stored at a temperature of 20-23º C before use. When they are subjected to low temperatures, the viscosity of the mixture becomes higher and, therefore, a greater number of bubbles are formed during agitation and it also becomes more difficult to release them.
• You can add from 5 to 15% of La Pajarita Finish Glass Solvent, which will facilitate the mixing of the mixture and, later, the leveling and elimination of bubbles during drying. The greater the amount of solvent incorporated, the longer the drying time will also be.
• - The surface must be dry and free of dust, grease, wax... and it must be well leveled.
• - It is advisable to protect the varnished object while it is drying, to prevent dust from settling.
• - One layer is enough, but if you want to apply more than one layer, it is enough to clean the surface with alcohol.
• - Wood with open pore will require a first coat to seal this pore in order to prevent bubbles from forming from the wood. To do this, prepare half of the mixture that would be used to varnish the surface and spread it with a brush or palette. Let dry for at least 5 hours and reapply the final coat.
• - You can brush on any type of painted surface such as dyes, patinas, glitters without fear of bleeding, without removing the previous paint.
• - It can also be used as an adhesive with a total drying time of 8 hours. Epoxy resin is one of the most powerful adhesives.
• - If an object is left resting for a long period of time on a surface with resin, impressions or marks may remain, but these can disappear in a few hours at temperatures of 21-23º C due to its flexibility. The higher the ambient temperature, the greater the capacity it will have both to create and to disappear these marks.
• - It can resist heat up to 75º and water, however, it is not convenient to apply a heat source directly.
• - It is not recommended for outdoor use.
• Warning: toxic and flammable product. Wear gloves and avoid contact with the skin, since if it is on it for a long time it can create burns.
• Quantity: 750 ml.

Brand: La pajarita.