Liquitex Acrylic Flowable Liquid Additive 118ml

• Dramatically increase the flow of your colour/medium while minimising brush strokes.
• Breaks water tension to improve flow and reduce viscosity, providing a smooth finish with fewer brush strokes due to less surface friction.
• Increases transparency and makes the colour more absorbent and blendable. Do not use undiluted as it causes poor acrylic adhesion, cracking, tackiness and water sensitivity. Fully mixable with all Liquitex products.
• Directions for use: - Dilute Flow Aid concentrate with water (1 part Flow Aid to 20 parts water). Distilled water will give the best results. Use 1 part Flow Aid to 10 parts water if a more concentrated effect is desired.
• - Add up to 25% diluted Flow Aid to your colour or medium and stir slowly to avoid foaming. If foaming occurs, let it sit until the foam disappears. Do not shake or stir too vigorously as foaming will occur.
• - If applied to an absorbent surface, the colour or medium will absorb as a stain or dye; if used on a non-absorbent surface, the colour or medium will be more fluid and take longer to dry.
• - Do not add more than 25% to your colour or medium and do not mix with other additives.
• This may cause excessive shrinkage, cracking and cracking of the acrylic film.
• Contents: 118 ml

Brand: Liquitex